Key Note

The current Ontario Fire Code has no article that deals with lithium-ion batteries. Your duties come from the general rules on fire safety, extinguishers, and sprinklers, so a business has to plan its own charging and storage controls.

The Ontario Fire Code has no article that deals with lithium-ion batteries, so a business manages them under its general fire safety duties. The owner keeps the building fire safe, provides extinguishers suited to the hazard, and keeps the sprinklers working. In practice that means one set charging area, the right chargers, a plan for damaged batteries, and fire protection matched to how many batteries you hold.

Lithium-ion batteries are everywhere in a modern business. A courier parks an e-bike by the loading dock, the warehouse switches its pallet jacks to lithium packs, and the returns desk fills a cardboard box with phones and power tools. Those batteries stay safe until one is damaged, overcharged, or overheated.

Why are lithium-ion batteries a fire risk?

A lithium-ion battery stores a lot of energy in a small, sealed cell. When a cell is crushed, punctured, overcharged, or left in heat, it can go into thermal runaway.

In thermal runaway, the cell starts heating itself faster than it can cool. It releases flammable gas, vents with a hiss or a pop, and catches fire. The heat then spreads to the cells beside it, and they fail one after another. A battery fire can flare up again after it looks out, because damaged cells keep heating inside the pack.

The warning signs show up before most fires:

  • A battery that swells, bulges, or splits its casing
  • A battery or charger that runs hot to the touch
  • Hissing, popping, or a sweet chemical smell
  • Smoke from a battery that isn't connected to anything

What does the Ontario Fire Code say about lithium-ion batteries?

We searched the current Ontario Fire Code in November 2026 and found no article that deals with lithium-ion batteries. That doesn't leave a business without duties. These general rules still apply:

  • Owner responsibility: unless the Code says otherwise, the owner is responsible for carrying out its provisions (Division A, Article 1.2.1.1).
  • Portable extinguishers: Section 6.2 of the Fire Code sets where extinguishers go, how many you need, and how they are maintained. Our guide to how many fire extinguishers your building needs explains the spacing rules.
  • Sprinklers: sprinkler systems have to be kept in operating condition, and nothing can be placed so it interferes with the water discharge from the sprinklers (Articles 6.5.1.2 and 6.5.1.5).
  • Fire safety plans: in buildings that need an approved fire safety plan, the plan has to provide for the control of fire hazards (Article 2.8.2.1). Battery charging belongs in that section.

Large battery energy storage systems, the kind that store power for a whole building, are a different matter. Those are engineered installations designed to other codes and standards, including NFPA 855. The rest of this guide covers the batteries most businesses hold: e-bikes, forklifts, tools, devices, and stock.

Where lithium-ion batteries hide in a business

Make a quick list before you plan anything. Expect it to run longer than you think:

  • E-bikes and e-scooters ridden by staff or couriers, often parked and charged near entrances
  • Forklifts, pallet jacks, and floor scrubbers with lithium packs and their chargers
  • Power tools and their battery banks in maintenance rooms and service vans
  • Laptops, tablets, and handheld scanners in charging carts
  • Retail and warehouse stock that contains batteries
  • Returns and recycling bins where damaged devices end up

How to set up a safer charging area

A battery works hardest and runs warmest while it charges. One planned charging area makes that risk easier to watch and easier to protect.

Choose the spot

  • Keep charging away from exits, corridors, and stairwells, so a battery fire can't block the way out.
  • Keep it clear of stored combustibles such as cardboard, pallets, and packaging.
  • Pick a spot people walk past during the day, and avoid back rooms nobody checks.

Set the rules

  • Use the charger that came with the battery, or one the manufacturer approves.
  • Follow the manufacturer's charging instructions, and unplug batteries once they're full.
  • Avoid charging overnight with nobody in the building, where your operations allow it.
  • Don't charge a battery that is hot, damaged, or swollen.
  • Ban extension cords and power bars for chargers.

Protect the area

  • Put smoke detection over the charging area, tied into your fire alarm where the building has one.
  • Mount a suitable extinguisher near the area, on the way out. Our post on AVD fire extinguishers for lithium-ion batteries explains which agent is made for these fires.
  • Keep the sprinkler heads above the area clear.

Train the people nearby

The staff who work beside the charging area are your early warning. Show them what a failing battery looks, sounds, and smells like, and agree on what they do next:

  • Keep away from a battery that hisses, pops, swells, or smokes, and don't try to unplug or move it.
  • Get people out of the area and call 911.
  • Use an extinguisher only on a small fire, and only with a clear way out behind you.
  • Report every damaged or hot battery to a supervisor, even if nothing happened.

Storing stock and damaged batteries

Stored batteries need the same attention as charging ones, and a warehouse can hold a great many of them.

  • Keep battery stock in its original packaging, away from heaters, sun-facing windows, and other heat sources.
  • Keep stock below the sprinkler clearance your sprinkler contractor gives you.
  • Separate damaged, swollen, or returned batteries from good stock right away.
  • Store damaged batteries in a non-combustible container, away from combustibles, until a recycler or the manufacturer collects them.
  • Train the people at the returns desk and in shipping to spot a damaged battery and report it.

A cardboard box of returned phones beside a pallet of packaging is a common sight in a warehouse. If one of those devices fails, the cardboard and packaging around it give the fire room to grow.

Which fire extinguisher works on a lithium-ion battery fire?

Standard ABC dry chemical extinguishers can knock down the flames on the materials around a battery, but they can't cool a cell in thermal runaway. Extinguishers using an aqueous vermiculite dispersion (AVD) agent are made for lithium-ion battery fires, and they are a sensible addition near charging areas and battery storage.

Any portable extinguisher is for a small fire, caught early. If a battery pack is burning beyond that, or more than one battery is involved, get everyone out and call 911. Our guide to the types of fire extinguishers explains which classes cover the rest of your building.

When to call in a fire protection company

A walk-through by a fire protection technician makes sense when you:

  • Switch a forklift fleet or floor equipment to lithium batteries
  • Start storing battery stock in bulk, or take on returns
  • Allow staff or couriers to charge e-bikes on site
  • Plan a battery energy storage system for the building

Boss Fire provides detection and suppression for lithium-ion battery storage installations, and our battery storage fire protection page explains how those systems are built.

Book a free site visit with Boss Fire

Boss Fire works with commercial and industrial buildings across the GTA and the surrounding region, from Niagara to Oshawa and north to Barrie. An NFPA-certified technician walks your charging and storage areas, checks your extinguishers and sprinkler clearances, and gives you an itemized quote for anything that needs attention. Quotes are answered the same business day, and in the GTA we can be on site within 48 hours.

Book My Free Site Visit

For the rest of your building, use the Ontario fire inspection checklist. If you run a distribution centre in Halton, see our guide to warehouse fire protection in Milton.

Sources and references

Frequently Asked Questions

Does the Ontario Fire Code have rules for lithium-ion battery storage? +

The current Ontario Fire Code has no article that deals with lithium-ion batteries. General duties still apply: the owner is responsible for carrying out the Code, portable extinguishers have to suit the hazard, and sprinkler systems have to be kept in operating condition. Large battery energy storage systems are engineered installations covered by other codes and standards.

What is thermal runaway? +

Thermal runaway happens when a damaged, overcharged, or overheated lithium-ion cell starts heating itself faster than it can cool. The cell releases flammable gas, catches fire, and can heat the cells next to it until they fail too. That chain reaction is why battery fires spread fast and can reignite after they appear to be out.

Where should a business charge e-bike and scooter batteries? +

Charge them in one set area, away from exits, stairwells, and stored combustibles, using the charger made for that battery. Keep the area visible and staffed while batteries charge where you can, and give it a suitable extinguisher and smoke detection.

What should I do with a damaged or swollen lithium-ion battery? +

Stop using and charging it, move it away from other stock and combustibles, and store it in a non-combustible container until a recycler or the manufacturer collects it. Don't throw damaged batteries in the garbage or a cardboard returns bin.

What fire extinguisher works on a lithium-ion battery fire? +

Extinguishers using an aqueous vermiculite dispersion (AVD) agent are made for lithium-ion battery fires, and they make sense near charging areas. Any portable extinguisher is only for a small fire. If a battery is burning beyond that, get people out and call 911.

NFPA-Certified · GTA

Need a Fire Safety Assessment?

Our certified technicians handle the full inspection cycle. Same-day service available across the GTA.

Get My Itemized Quote → Call 905-519-BOSS