Key Note

A fire inspector can direct an order to the owner or the occupant. Settle who handles each fire protection system in the lease before an inspector asks.

Under the Ontario Fire Code, the owner is responsible for fire safety, and the Code defines owner to include anyone with control over any portion of the building. In a commercial lease, that can mean the landlord and the tenant at the same time. The lease decides who arranges and pays for each piece of work, but a fire inspector can issue an order to either one.

A restaurant opens in a strip plaza. The tenant assumes the landlord books the kitchen suppression service, because the landlord books everything else. The landlord assumes the tenant handles it, because the kitchen belongs to the tenant. A year later, a fire inspector finds an out-of-date service tag on the hood system, and both parties discover the lease never mentioned it.

What does the Ontario Fire Code say about responsibility?

Two short provisions in Division A of the Fire Code set the starting point.

  • Article 1.2.1.1: "Unless otherwise specified, the owner is responsible for carrying out the provisions of this Code."
  • Article 1.4.1.2 defines owner as "any person, firm or corporation having control over any portion of the building or property under consideration and includes the persons in the building or property."

Read together, these mean responsibility follows control. A landlord who controls the base building, the common areas, and the shared systems is an owner for those. A tenant who controls its leased unit can be an owner for that space. In a single-tenant building leased on net terms, the tenant may control almost everything.

A few articles name a different person. A technician who performs the annual fire alarm inspection, for example, must have completed a program or course acceptable to the Fire Marshal, and the owner must make sure that requirement is met (Division C, Article 1.2.1.3).

Who can a fire inspector hold to account?

Section 21 of the Fire Protection and Prevention Act lets an inspector who has inspected a property order the owner or the occupant to take any measure needed for fire safety. Those measures include fire alarms and detection, fire suppression, the preparation of a fire safety plan, and the correction of any Fire Code contravention.

So the inspector doesn't need to read your lease. If the extinguishers in a tenant's unit are out of date, the order may name the tenant, the landlord, or both. Section 23 of the Act requires the order to set out the reasons, the action required, and the time allowed to comply. Our guide to clearing a fire inspection order explains what to do when one arrives.

How commercial leases usually split the work

The split below reflects common commercial lease practice. It isn't a rule of law, and your lease may say something different, so read it first.

Usually the landlord: the base building

  • The sprinkler system, including its inspection and testing schedule
  • The fire alarm system, its annual inspection, and monitoring
  • Emergency lighting and exit signs in common corridors, stairwells, and shared areas
  • Portable extinguishers in common areas
  • Standpipes, fire pumps, and fire department connections
  • The building's fire safety plan, where the Fire Code requires one

Often the tenant: the leased unit

  • Portable extinguishers inside the unit, and their annual inspection
  • Commercial kitchen hood suppression, for a restaurant or food service tenant
  • Keeping the unit's exits and aisles clear
  • Keeping storage away from sprinklers. The Fire Code bans anything that interferes with sprinkler discharge (Article 6.5.1.5).
  • Training staff in their part of the building's fire emergency procedures

Often unclear: the items that cause disputes

  • Fire alarm devices and emergency lights inside a tenant's unit
  • Extra extinguishers needed because a tenant brought in a new hazard
  • Sprinkler and detector changes after a tenant moves walls
  • A change in use, such as a warehouse unit that becomes a gym. The fire safety plan must be reviewed and revised to take account of changes in use (Article 2.8.2.1).

The unclear items deserve their own line in the lease. They're where most gaps start.

What happens when nobody books the work

A gap between landlord and tenant rarely announces itself. The tags go out of date, and nobody notices until one of three things exposes it:

  • A fire inspection. The inspector writes an order, and the deadline arrives before the parties agree on who pays.
  • An insurance renewal. The insurer asks for current inspection reports, and nobody has them. Our post on the fire safety documents insurers ask for lists what to keep on hand.
  • A fire. If nobody has serviced the kitchen suppression system, nobody can count on it to discharge.

Fire Code offences carry fines on conviction under the Fire Protection and Prevention Act. Our post on the 2026 Ontario Fire Code changes covers the penalties.

How to close the gaps

  1. List every fire protection system in the building. Include sprinklers, the fire alarm, emergency lighting, exit signs, extinguishers, and any kitchen suppression.
  2. Assign each one. For every system, name who arranges the inspection, who pays, and who fixes deficiencies.
  3. Put the list in the lease or a schedule to it. A one-page table removes most arguments before they start.
  4. Keep the records at the building. The Fire Code requires the original or a copy of every required record to stay at the building for at least two years (Division B, Article 1.1.2.2). When a tenant books its own extinguisher inspection, a copy of the report belongs in the building's records too.
  5. Recheck after renovations and changes in use. Moved walls, new equipment, and new tenants all change what the building needs.
  6. Agree who calls whom when a system goes down. When any part of a fire alarm or sprinkler system is shut down, the Fire Code requires the fire department, the building's occupants, and supervisory staff to be notified (Division B, Articles 6.3.1.3 and 6.5.2.4). In a multi-tenant building, the landlord usually makes those calls, so tenants need to know to report a beeping panel or a leaking sprinkler head to the property manager right away.

Multi-tenant buildings and portfolios

The cleanest fix is one inspection schedule for the whole property. When the same contractor inspects the common areas and every unit on the same visit, no unit falls off the calendar and every record lands in one place. Boss Fire charges one service call fee per visit, so combining the common areas and the units in a single visit keeps the cost predictable.

For owners and property managers with several buildings, our national accounts program puts every site on one schedule with one point of contact.

Get the responsibilities straight with Boss Fire

Boss Fire inspects and services fire protection systems for landlords, tenants, and property managers across the GTA and the surrounding region, from Niagara to Oshawa and north to Barrie. Our technicians are NFPA-certified, and our fire alarm technicians are registered with the CFAA. A free site visit gives you a list of every system in the building and what each one needs, which makes the lease conversation much shorter. Quotes are itemized and answered the same business day.

Book My Free Site Visit

See our fire extinguisher inspection page for in-suite extinguisher work, read about kitchen suppression inspections if you lease to restaurants, and use our Ontario fire inspection checklist to see every system an inspector looks at.

Sources and references

Frequently Asked Questions

Are landlords responsible for fire extinguishers in Ontario? +

The Ontario Fire Code makes the owner responsible, and its definition of owner includes anyone with control over any portion of the building. In many commercial leases, the landlord handles extinguishers in common areas and the tenant handles the ones inside its own unit. The lease decides the split, and a fire inspector can issue an order to either party.

Who counts as the owner under the Ontario Fire Code? +

Division A of the Fire Code defines owner as any person, firm, or corporation having control over any portion of the building or property under consideration, and it includes the persons in the building or property. A commercial tenant that controls its unit can fall within that definition for the space it controls.

Can a fire inspector give an order to a commercial tenant? +

Yes. Section 21 of the Fire Protection and Prevention Act lets an inspector who has inspected a property order the owner or the occupant to take measures needed for fire safety, including fixing any Fire Code contravention.

Who pays for fire alarm and sprinkler inspections in a multi-tenant building? +

The lease decides. In many commercial leases, the landlord arranges inspections of base building systems such as the sprinklers and the fire alarm, and recovers the cost through operating costs that tenants share. Read your lease, and get legal advice if the wording is unclear.

What should a commercial lease say about fire safety? +

A clear lease lists each fire protection system, who arranges its inspection and repairs, who pays, and where the records are kept. It should also cover alterations, changes in use, and who notifies whom when a system is shut down.

NFPA-Certified · GTA

Need a Fire Safety Assessment?

Our certified technicians handle the full inspection cycle. Same-day service available across the GTA.

Get My Itemized Quote → Call 905-519-BOSS